As a mixture of epoxy and polyester resins, this coating combines chemical resistance, toughness, flexibility, and greater weathering capabilities. The resin combination also leads to good flow and electrostatic spray characteristics. Recommended for interior purposes.

Intended use:

Shelving, displays, office furniture, oil filters, machinery, hot water heaters, and electrical switchgear.


Cure Cycle: 10 min @ 400° F; 12-15 min @ 375° F (peak metal temperature)
Specific Gravity: 1.20 to 1.70 g/cm3 (based on color/gloss)
Impact Resistance: 80-160 in-lbs
Pencil Hardness: H - 3H
Film Thickness: 1.5 - 2.5 mils (based on color/finish)


Store in a cool and dry location. Temperature to not exceed 80 degrees Fahrenheit.

The above technical data is accurate to the best of our knowledge. No warranty is expressed or implied as application methods and conditions and intended use is beyond our control.